Hedgehog Central banner

Making a wheel heavier?

1917 Views 9 Replies 8 Participants Last post by  allisonsnickers
So right now I have a homemade bucket wheel and it's working out splendidly except... when Turbo gets really excited and runs really fast, the wheel actually moves across the cage. It only goes a few inches before it hits a wall, but then it proceeds to bang against the side and make a really loud thumping noise until I move it. This is very annoying for me at 4 am.

I was thinking if I filled the base of the wheel with something it would be heavier and not slide around, but I don't know what to fill it with? Any ideas?
[attachment=0:8k27rdzv]misc 052.jpg[/attachment:8k27rdzv]


See less See more
1 - 1 of 10 Posts
You could get 4 pieces of velcro (1 on each corner of the wheel) so it wouldn't move at all, but still be able to come out for cleaning.
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.