|02-17-2019 08:30 AM|
Yea a lot if people dont like that wheel deem it as unsafe but cant remember why.
I think that as long as that one bar is on the plastic and he only gets off the side you've taken it off then it should be safe.
|02-17-2019 06:20 AM|
|Brooke Lancelot||Aren't the Kaytee wheels the unsafe ones?|
|02-16-2019 02:34 PM|
|Askeptosaurus||You could also get the Kaytee Comfort wheel from Chewy.com. I'm not sure about shipping but it's at least a solid-bottom wheel with an entirely open side.|
|02-04-2019 10:11 AM|
|Brooke Lancelot||The bearing will be on the one crossbar we're keeping. It'll be against the cage so it isn't suppose to do any damage to him, right?|
|02-03-2019 01:45 PM|
|Ria||The back would make it more secure, and be easier for putting on a bearing, and attaching to the cage but I havent seen anything anywhere about it needing a back.|
|02-03-2019 12:41 PM|
|Brooke Lancelot||Yep, already on that. Accept for the back. Must there be a back, or can I just keep it open?|
|02-03-2019 04:52 AM|
|Ria||If your putting it on the cage, you'll need a back to the wheel to make it easier, and a bearing to make it spin. So you'll need to get a round circle for the back put a hole in the middle of that for the bearing and fix it securly to the wheel where its not going to come off. And use the bearing to attach it to the cage.|
|02-03-2019 04:16 AM|
|Brooke Lancelot||Awesome. The crossbars are coming off. We've got a plan to attach it to the cage itself since I can't just take the crossbars off, because its connected to the wheel and acts as its axis. But putting it on the cage, we'll be changing the weld and the crossbars would've be needed anymore.|
|02-01-2019 05:12 PM|
|Ria||If you take the crossbars off it should be fine because they are big problem on the one you already have. If you can get those off its perfectly okay to use.|
|02-01-2019 03:28 PM|
Oh... Flip. Ok so any holes is a no no for future references? We've actually made a plan for the wheel that I have.
We take out the stand and place it on the cage. The he won't pinch against the crossbars and stand. Or must I still remove the crossbars?
|This thread has more than 10 replies. Click here to review the whole thread.|